Dr.
Halimahtun M. Khalid
Education
Work Experience
Professional Affiliations
Awards
Editorial
Publications
Invited Addresses
Expert Advisor
Conference Organisation
Short Courses For Industry
Consulting
EDUCATION
| 111 |
Ph.D. (Cognitive Ergonomics), Faculty
of Engineering, University of London, 1990
M.Sc. (Applied Experimental Psychology), Faculty
of Science, Monash University, 1981
M.BehSc. (Psychology), School of Behavioural Sciences,
La Trobe University, 1977
B.A.Hons. (Anthropology & Sociology), Faculty
of Arts & Social Sciences, University of Malaya,
1976
Programme for Executive Development, School of Business,
Mara Institute of Technology, 1976 |
WORK EXPERIENCE
| 111 |
Founding Director
& Principal Scientist, Damai Sciences Sdn
Bhd, October 2003 - present
Adjunct Professor, Curtin University of Technology,
Australia, January 2004 - present
Professor of Cognitive Ergonomics, Universiti
Malaysia Sarawak, 1998 – 31 August 2003
Founding Director, Institute of Design and Ergonomics
Application, 1997 – 2003
Founding Dean, Centre for Applied Learning and
Multimedia, Universiti Malaysia Sarawak, 1993-1997
Founding Head, Laboratory for Virtual Environment
Research, 1999-2001
Associate Professor, Universiti Malaysia Sarawak,
1993 - 1998
Director, Centre for Educational Technology, Universiti
Kebangsaan Malaysia, 1991 - 1993
Visiting Professor, Graduate School of Human-Machine
Interaction, Linköping University, Sweden,
April-August 1998.
Visiting Professor, Finnish Institute of Occupational
Health, Helsinki, Finland, May-July 1998.
Visiting Scholar, Department of Industrial Engineering
and Engineering Management, Hong Kong University
of Science and Technology, Hong Kong, August-
December 1998.
|
PROFESSIONAL AFFILIATIONS
| 111 |
Work With Computing
Systems (WWCS) Group President, 2002 – 2004
International Ergonomics Association (IEA) IEA Councillor
for SEAES, 1994-present
Member, International Development Committee, 2003
- present
Member, Policy and Development Committee, 1995-1997
Chair, Sub-Committee IEA Knowledge Portal, Policy
and Development, 2000-2003
Member, IEA Technical Committee for Human Computer
Interaction, 2003- present
The Southeast Asian Ergonomics Society (SEAES) President
1994-1997
Executive Council Member 1997-2000
Alternate Councillor for IEA, 2000-present Professional
Associations:
• The Human Factors and
Ergonomics Society (HFES), USA
• The
Southeast Asian Ergonomics Society (SEAES) |
AWARDS
| 111 |
Best ASEAN Paper
Award (Usability evaluation of assistive device
in open fractures healing by patients and non-patients),
7th Southeast Asian Ergonomics Society & 4th
Malaysian Ergonomics Conference, SEAMEC 2003, 21
May 2003, Kuching, Sarawak, Malaysia.
Gold Medal, Ministry of Science and Technology Malaysia,
and Malaysian Association of Research Scientists
Award for R&D Inventions/Innovations for research
project (Ergonomic design of assistive device),
October 2002, Kuala Lumpur.
The SEAES President’s Distinguished Service
Award for Outstanding Services to The Southeast
Asian Ergonomics Society, December 2000.
Kesatria Mangku Negara (KMN), The Yang DiPertuan
Agong’s Birthday Honours, June 1996.
Best Student Award, Department of Anthropology and
Sociology, University of Malaya, June 1976. |
EDITORIAL
| 111 |
Member of Editorial
Boards for International Journals and Handbooks:
• Handbook of Human-Computer Interaction,
Elsevier Science, 2004 – present.
•
Asian Journal of Ergonomics, Pan-Pacific Council
on Occupational Ergonomics, 2000 – present.
• Transportation Research: Psychology and
Behaviour, Pergamon Press, 1997-present.
•
Ergonomics, Taylor & Francis, 1996 – present. |
PUBLICATIONS
Books
| 111 |
Halimahtun M.
Khalid (Ed.) (1997). ASEAN Ergonomics ‘97.
Proceedings of the 5th SEAES
Conference, Kuala Lumpur: IEA Press, 700 pp.
Halimahtun M. Khalid (Ed.) (2000). Virtual Reality:
Select Issues and Applications. London: ASEAN
Academic Press, 252 pp.
Martin G. Helander, Halimahtun M. Khalid and
Tham Ming Po (Eds.) (2001). Proceedings of the
International Conference on Affective Human Factors
Design, London: ASEAN Academic Press,
541 pp.
Halimahtun M. Khalid, Lim T.Y. and Lee, N.K.
(Eds.) (2003). Proceedings of 7th SEAES and 4th
Malaysian Ergonomics Conference, SEAMEC 2003,
Kuching: Unimas, 500 pp.
Halimahtun M. Khalid, Martin G. Helander and
Alvin W. Yeo (Eds.) (2004). Work With Computing
Systems 2004, Proceedings of 7th International
Conference on Work with Computing Systems, WWCS
2004, Kuala Lumpur: Damai Sciences Sdn Bhd, 920
pp.
|
Book Chapters
| 111 |
Halimahtun M.
Khalid (1985). Central task demand and peripheral
visual performance. In D.J. Oborne (Ed.), Contemporary
Ergonomics 1985, London: Taylor and Francis, pp.
54-59.
Halimahtun M. Khalid (1991). Assessment of integrated
speech-manual input system: towards optimising
behaviour and performance. In E.J. Lovesey (Ed.),
Contemporary Ergonomics 1991, London: Taylor and
Francis, pp. 143-148.
Halimahtun M. Khalid (1996). Effects of shiftwork
and visual display terminal on women's health
and performance. In Hing Ai Yun (Ed), Industrialization
and Women’s Health, Singapore: Singapore
Council of Women’s Organisation, pp. 205-224.
Halimahtun M. Khalid and Ooi Poh Chee (1996).
Effects of motorcycle helmets on task performance
and user acceptability. In A.G. Gale, I.D. Brown,
C.M. Haslegrave and S.P. Taylor (Eds.), Vision
in Vehicles - V, Vol. 5, Amsterdam: Elsevier Science,
pp. 363-370.
Halimahtun M. Khalid (1996). Human factors in
developing multimedia capability. In: O.Brown
& H.Hendrick (Eds) Organizational Design and
Management, Proceedings of ODAM ‘96, Breckenridge.
Amsterdam: North-Holland, pp. 119-124.
Halimahtun M. Khalid (1998). Human factors of
IT-based solutions for worldwide manufacturing
web. In W. Karwowski & R. Goonetilleke (Eds.),
Manufacturing Agility and Hybrid Automation-II,
Louisville, USA: IEA Press, pp. 7-11.
Halimahtun M. Khalid (1998). Multimedia usability
and its implications for Ergonomics. In P.A. Scott,
R.S. Bridger & J. Charteris (Eds.), Global
Ergonomics, Amsterdam: Elsevier Science, pp. 581-584.
Halimahtun M. Khalid (1999). Uncovering customer
needs for Web-based DIY product design. In Axelsson,
J., Bergman, B. and Eklund, J. (eds.) TQM and
Human Factors – towards successful integration,
Linköping, Sweden: CSHTO, pp. 343-348.
Halimahtun M. Khalid and Martin G. Helander
(2000). Issues in the design and usability of
virtual environments. In H.M. Khalid (Ed.) Virtual
Reality: Select Issues and Applications, London:
ASEAN Academic Press, Chapter 4, pp. 43-62.
Halimahtun M. Khalid (2000). Multimedia production.
In W. Karwowski (Ed.), International Encyclopedia
of Ergonomics and Human Factors. London: Taylor
& Francis, pp. 720-724.
Halimahtun M. Khalid and Martin G. Helander
(2000). Automatic speech recognition. In W. Karwowski
(Ed.) International Encyclopedia on Ergonomics
and Human Factors, London: Taylor & Francis,
pp. 631-635.
Halimahtun M. Khalid and Martin G. Helander (2003).
Web-based do-it-yourself product design, In M.M.
Tseng and F. T. Piller (eds.), The Customer Centric
Enterprise: Advances in Mass Customization and
Personalization, New York/Berlin: Springer, Chapter
13, 247-266.
Oon Yin Bee and Halimahtun M. Khalid (2003).
Usability of design by customer websites, In M.M.
Tseng and F. T. Piller (eds.), The Customer Centric
Enterprise: Advances in Mass Customization and
Personalization, New York/Berlin: Springer, Chapter
15, 283-300.
|
Journal
| 111 |
Halimahtun M.
Khalid (1983), The effects of visual noise on
peripheral visual processing, Akademika, 22, 27-36.
Halimahtun M. Khalid (1985), The ability of selected
personality variables to discriminate and predict
brand preference, Manusia dan Masyarakat, 6, 104-115.
Halimahtun M. Khalid (1990), A behaviour-based
methodology for empirical evaluation of computer
aided design systems, Jurnal Psikologi Malaysia,
6, 47-61.
Halimahtun M. Khalid (2000). Human factors of
IT-based solutions for worldwide manufacturing
web, International Journal of Human Factors and
Ergonomics in Manufacturing, 10 (1), 99-113.
Martin G. Helander and Halimahtun M. Khalid (2000).
Modelling the customer in electronic commerce,
Applied Ergonomics, 31, 609-619.
Halimahtun M. Khalid (2001). Modelling and analysis
of CAD expert behaviour in using manual input
devices, International Journal of Industrial Ergonomics,
27, 79-92.
Foong Yeen Chan and Halimahtun M. Khalid (2003).
Is talking to an automated teller machine natural
and fun, Ergonomics, 46 (13/14), 1386-1407.
Halimahtun M. Khalid and Martin G. Helander (2004).
A framework for affective customer needs in product
design, Theoretical Issues in Ergonomics Science,
5 (1), 27-42.
Halimahtun M. Khalid (2004). Conceptualizing
affective human factors design, Theoretical Issues
in Ergonomics Science, 5 (1), 1-3.
|
Conference Proceedings
| 111 |
Halimahtun M.
Khalid (1990). Integrating speech and manual input
devices in computer aided design. In ICIT'90,
Proceedings of The International Conference on
'Information Technology - IT for Competitive Advantage',
Kuala Lumpur: MNCC & MSORSM, pp. E89-E104.
Halimahtun M. Khalid (1991). Development and
validation of human factors guidelines for speech-manual
input integration in CAD systems, In NCIT'91,
Proceedings of the National Conference on 'Information
Technology – Innovation Through IT', Petaling
Jaya: MNCC, pp. 181-194.
Halimahtun M. Khalid (1991). An ergonomic investigation
of road user behaviour: a framework, Proceedings
of The National Road Safety Seminar 1991, Petaling
Jaya, JKR & JICA, pp. 3.24-3.36.
Halimahtun M. Khalid (1993). Understanding road
user behaviour: patterns and modification. Proceedings
of CARS ‘93, Conference on Asian Road Safety
1993, Kuala Lumpur: REEEE, pp. 1-14.
Halimahtun M. Khalid (1993). Program pendidikan
psikologi berasaskan model UNIMAS (The psychology
programme based on the UNIMAS model). In Aminuddin
M. Yusof & Saedah A. Ghani (Eds), Pengajian
Psikologi. Bangi: Department of Psychology, pp.
35-44.
Halimahtun M. Khalid (1997). Human factors in
multimedia production. In Proceedings of the 13th
Triennial IEA Congress, Vol. 5. Tampere: Finnish
Institute of Occupational Health, pp. 17-22.
Halimahtun M. Khalid and Martin G. Helander (1997).
A design framework for cooperative telelearning.
In Proceedings of the 13th Triennial IEA Congress,
Vol. 1. Tampere: Finnish Institute of Occupational
Health, pp. 378-380.
Helander, M.G., Khalid, H.M., and Tseng, M.M.
(1998). Mapping customer needs in web-based DIY
design of consumer products, Proceedings of the
3rd Annual International Conference on 'Industrial
Engineering Theories, Applications and Practice,'
HKUST, Hong Kong (CD-ROM).
Martin G. Helander and Halimahtun M. Khalid (1999).
Modelling customer needs in web-based Do-It-Yourself
product design. In Abeysekera, et al. (eds.),
Proceedings of the 10th Year Anniversary of M.Sc.
Ergonomics International Conference, Lulea, Sweden,
28-30 October, pp. 9-14.
Halimahtun M. Khalid (2000). Integrating speech
and manual input devices in multimodal CAD systems,
Proceedings of the 14th Triennial Congress of
the IEA and 44th Annual Meeting of the HFES, San
Diego, California, 29 July-4 August, Vol 1, pp.
338-341.
Halimahtun M. Khalid (2000). Mass customization
and web-based Do-It-Yourself product Design, Proceedings
of the 14th Triennial Congress of the IEA and
44th Annual Meeting of the HFES, San Diego, California,
29 July-4 August, Vol 2, pp. 766-769.
Pan Kok Long, Halimahtun M. Khalid and Ha How
Ung (2000). Ergonomic design of a mechanical device
for increasing the rate of union in open fractures
of the tibia, Proceedings of the 14th Triennial
Congress of the IEA and 44th Annual Meeting of
the HFES, San Diego, California, 29 July-4 August,
Vol. 4, pp. 140-143.
Halimahtun M. Khalid (2000). Utility of virtual
environment for collaborative decision making
by concurrent engineering team, In T. Marek and
W. Karwowski (eds.) Manufacturing Agility and
Hybrid Automation-III, Proceedings of HAAMAHA
2000 Conference, Krakow, Poland, August 27-30,
Vol 2.
Halimahtun M. Khalid (2000). Human factors of
virtual collaboration in product design, In K.Y.
Lim et al. (ed.), Proceedings of APCHI/ASEAN Ergonomics
2000 Conference, Elsevier Science, Amsterdam,
pp. 25-38.
Halimahtun M. Khalid, Teh Chee Siong and Fong
Wan Loong (2000). Supporting collaborative design
by a concurrent engineering team through a virtual
environment, In K.Y. Lim et al. (ed.), Proceedings
of APCHI/ASEAN Ergonomics 2000 Conference, Elsevier
Science, Amsterdam, pp. 305-310.
Chan Foong Yeen and Halimahtun M. Khalid (2000).
A method for uncovering the dialogue patterns
of speech driven automatic teller machine for
bilingual users, In K.Y. Lim et al. (ed.), Proceedings
of APCHI/ASEAN Ergonomics 2000 Conference, Elsevier
Science, Amsterdam, pp. 218-223.
Halimahtun M. Khalid (2001). Can customer needs
express affective design? In M.G. Helander, H.M.
Khalid & M.P. Tham (eds.), Proceedings of
International Conference on Affective Human Factors
Design, Asean Academic Press, London, pp. 190-198.
Chan Foong Yeen and Halimahtun M. Khalid (2001).
Is talking to Automated Teller Machine natural
and fun? In M.G. Helander, H.M. Khalid & M.P.
Tham (eds.), Proceedings of International Conference
on Affective Human Factors Design, Asean Academic
Press, London, ISBN 1-901919-28-5, pp. 356-362.
Halimahtun M. Khalid (2001). Toward affective
collaborative design, Proceedings of HCI International
2001, Lawrence Erlbaum, Marwah, New Jersey, pp.
370-374.
Martin G. Helander and Halimahtun M. Khalid (2001).
Interface for mass customisation in E-commerce,
Proceedings of HCI International 2001, Lawrence
Erlbaum, Marwah, New Jersey, pp. 73-77.
Halimahtun M. Khalid and Martin G. Helander (2001).
Facilitating mass customization and web-based
do-it-yourself design, Proceedings of 2001 World
Congress on Mass Customization and Personalization,
HKUST, Hong Kong (CD-ROM), pp. 1-10.
Oon Yin Bee and Halimahtun M. Khalid (2001).
Usability of Design by Customer websites for mass
customization, Proceedings of 2001 World Congress
on Mass Customization and Personalization, HKUST,
Hong Kong (CD-ROM), pp. 1-9.
Halimahtun M. Khalid and Chan Foong Yeen (2001).
Usability evaluation of speech driven automatic
teller machine, Proceedings of International Congress
on Humanizing Work and Work Environment, 11-14
December 2001, IIT Mumbai, India (CD-ROM),
Halimahtun M. Khalid (2002). Enabling world wide
work in the digital economy, In Luczak, H., Cakir,
A.E. and Cakir, G. (eds.), Proceedings of WWDU
2002 on World Wide Work, Berlin: Ergonomic Institute,
pp. 8-13.
Halimahtun M. Khalid and Ting Choo Chiaw (2002).
Evaluating task performance in immersive virtual
environments, In Luczak, H., Cakir, A.E. and Cakir,
G. (eds.) Proceedings of WWDU 2002 on World Wide
Work, Berlin: Ergonomic Institute, pp. 240-243.
Alvin Yeo and Halimahtun M. Khalid (2002). Supporting
concurrent engineering in conceptual product design
using virtual environment, In Luczak, H., Cakir,
A.E. and Cakir, G. (eds.), Proceedings of WWDU
2002 on World Wide Work, Berlin: Ergonomic Institute,
pp. 244-246.
Halimahtun M. Khalid (2002). A methodology for
measuring virtual team collaboration, Proceedings
of the 3rd Malaysian Ergonomics Seminar, Johor
Bahru: UTM, pp. 85-95.
Oon Yin Bee and Halimahtun M. Khalid (2002).
How to do-it-yourself? Evaluation of configuration
systems in design by customer websites, Proceedings
of the 3rd Malaysian Ergonomics Seminar, Johor
Bahru: UTM, pp. 1-16.
Chan Foong Yeen and Halimahtun M. Khalid (2002).
Interacting with automatic teller machine using
voice and manual input, Proceedings of the 3rd
Malaysian Ergonomics Seminar, Johor Bahru: UTM,
pp. 172-187.
Toeiyah Tioh and Halimahtun M. Khalid (2002).
Discomfort and performance of VDT task at the
National Audit Office, Kuching. Proceedings of
the 3rd Malaysian Ergonomics Seminar, Johor Bahru:
UTM, pp. 34-67.
Halimahtun M. Khalid (2002), A framework for
affective customer needs in product design, Proceedings
of the Human Factors and Ergonomics Society 46th
Annual Meeting, Santa Monica, CA: HFES, pp. 983-987.
Halimahtun M. Khalid, Pan Kok Long and Ha How
Ung (2003). Usability evaluation of assistive
device in open fractures healing by patients and
non-patients, In Khalid, H.M., Lim T.Y. and Lee,
N.K. (Eds.) (2003). Proceedings of 7th SEAES and
4th Malaysian Ergonomics Conference, SEAMEC 2003,
Kuching: Unimas, pp. 80-88.
Lim Tek Yong and Halimahtun M. Khalid (2003).
A framework on virtual collaborative customization
in home modification, In Khalid, H.M., Lim T.Y.
and Lee, N.K. (Eds.) (2003). Proceedings of 7th
SEAES and 4th Malaysian Ergonomics Conference,
SEAMEC 2003, Kuching: Unimas, pp. 354-361.
Oon Yin Bee and Halimahtun M. Khalid (2003),
Development of an online configuration system
for designing cell phone, In Khalid, H.M., Lim
T.Y. and Lee, N.K. (Eds.) (2003). Proceedings
of 7th SEAES and 4th Malaysian Ergonomics Conference,
SEAMEC 2003, Kuching: Unimas, pp. 370-377.
Halimahtun M. Khalid (2003). Measurement and
analysis of behaviour protocols of concurrent
teams in virtual collaboration, Proceedings of
the 8th International Conference on Human Aspects
of Advanced Manufacturing: Agility & Hybrid
Automation, Rome, Italy: National Research Council
of Italy, pp. 429-435.
Halimahtun M. Khalid and Oon Yin Bee (2003).
How usable and satisfying is e-Design of mass
customized product? Proceedings of the 8th International
Conference on Human Aspects of Advanced Manufacturing:
Agility & Hybrid Automation, Rome, Italy:
National Research Council of Italy, pp. 353-359.
Halimahtun M. Khalid (2003). Analysing the design
sequence in do-it-yourself design, In Proceedings
of the 15th Triennial Congress of the International
Ergonomics Association, Seoul, Korea: Ergonomics
Society of Korea, CD-ROM, 4 pp.
Halimahtun M. Khalid (2003). ASEAN Ergonomics
and prioritizing research, In Proceedings of the
15th Triennial Congress of the International Ergonomics
Association, Seoul, Korea: Ergonomics Society
of Korea, CD-ROM, 4 pp.
Martin G. Helander and Halimahtun M. Khalid (2003).
Human factors of mass customization, In Proceedings
of the 15th Triennial Congress of the International
Ergonomics Association, Seoul, Korea: Ergonomics
Society of Korea, CD-ROM, 4 pp.
Oon Yin Bee and Halimahtun M. Khalid (2003).
Evaluating a design by customer website for cell
phone customization, In Proceedings of the 15th
Triennial Congress of the International Ergonomics
Association, Seoul, Korea: Ergonomics Society
of Korea, CD-ROM, 4 pp.
Lim Tek Yong and Halimahtun M. Khalid (2003).
Conceptualizing a collaborative system for mass
customizing home modifications, In Proceedings
of the 15th Triennial Congress of the International
Ergonomics Association, Seoul, Korea: Ergonomics
Society of Korea, CD-ROM, 4 pp.
Halimahtun M. Khalid and Oon Yin Bee (2003).
Usability of configuration systems in Design by
Customer websites, In Proceedings of 47th Annual
Meeting of the Human Factors and Ergonomics Society,
Denver, Colorado: HFES, CD-ROM, pp. 811-815.
Halimahtun M. Khalid (2004). What synchronous
text chat revealed about online design collaboration
and team awareness, In Proceedings of 7th International
Conference on Work with Computing Systems, Kuala
Lumpur, Malaysia: Damai Sciences, CD-ROM, pp.
353-358.
Oon Yin Bee and Halimahtun M. Khalid (2004).
Determining the design sequence for designing
on the web. In Proceedings of 7th International
Conference on Work with Computing Systems, Kuala
Lumpur, Malaysia: Damai Sciences, CD-ROM, pp.
562-567.
Lim Tek Yong, Alvin W. Yeo and Halimahtun M.
Khalid (2004). Exploratory studies of awareness
in negotiating home modification. In Proceedings
of 7th International Conference on Work with Computing
Systems, Kuala Lumpur, Malaysia: Damai Sciences,
CD-ROM, pp. 359-364.
Sheau-Farn Max Liang, Halimahtun M. Khalid, Zahari
Taha and Thomas Plocher (2004). In search of internationalized
operator interface displays in process control:
a comparison among Malaysian, Singaporean and
Chinese. In Proceedings of 7th International Conference
on Work with Computing Systems, Kuala Lumpur,
Malaysia: Damai Sciences, CD-ROM, pp. 253-258.
|
Technical Reports
| 111 |
Halimahtun M.
Khalid (1992). Laporan Kajian Tingkah Laku Pengguna
Jalan Raya (Final report on road user behaviour
study).
Halimahtun M. Khalid (1996). Usability Evaluation
of Scenario-based Simulation Learningware, Final
Report UNIMAS Grant No. 24/94.
Halimahtun M. Khalid (1997). Effectiveness of
Videoconferencing in Teaching-Learning of Educational
Technology, Final Report UNIMAS Grant No. 25/94.
Martin G. Helander and Halimahtun M. Khalid (1999).
Use of virtual reality for design, evaluation,
control and training in avionic systems, HFA Technical
Report, Linköping University, Sweden.
Halimahtun M. Khalid, Fong Wan Loong and Teh
Chee Siong (2000). Keberkesanan Pembangunan Kampus
Unimas dalam Persekitaran Maya (UniCaVE): Satu
kajian kes ke atas model persekitaran maya Pusat
Khidmat Maklumat Akademik, Progress and Final
Reports, UNIMAS Grant No. 182/99(36).
Halimahtun M. Khalid (2001). Cross-cultural Survey
of Process Control Operators in Sarawak, Final
Report, Honeywell Grant.
Halimahtun M. Khalid et al. (2002). Virtual collaboration
in product design (VCODE), Progress and Final
Reports, IRPA Grant No. 04-02-09-1401.
Halimahtun M. Khalid (2002). Benefits of presence
on task performance in immersive virtual environments,
Final Report, UNIMAS Grant No. 258/2001 (17).
Pan Kok Long, Halimahtun M. Khalid and Ha How
Ung (2002). Ergonomic design of assistive device
for rehabilitation, Final Report, UNIMAS Grant
No. 169/99 (23).
Halimahtun M. Khalid, Gul Amir Khan, Ada Yuen,
Yogesh Tadwalker and Tahira Amir Khan (2004).
Usability evaluation of G2B/Licencing Portal.
Consulting Report for the Ministry of Trade and
Industry, Singapore, 29 February 2004.
Halimahtun M. Khalid and Martin G. Helander
(2004). Ergonomics of sitting work postures. Consulting
Report for Scholle Industries Pty. Ltd. DS/RND/1/00,
25 March 2004.
Halimahtun M. Khalid, Martin G. Helander, Rudi
Lim, Lo Shuan, Oon Yin Bee (2004). Ergonomics
Improvement Study of Work Systems for Offices
and Laboratories at Sarawak Shell Berhad. Consulting
Report for Sarawak Shell Berhad, Miri, Sarawak,
Malaysia. DS/2(2)/04, 16 September 2004.
|
INVITED ADDRESSES
| 111 |
Invited speaker,
Ergonomics and Repetitive Strain Injury, Sarawak
Shell Berhad SMEP-HSE Seminar, Lutong Complex,
Miri, Sarawak, Malaysia, 5 October 2004.
Invited speaker, Conceptualizing an IRPA Research
Proposal – What you need to know but cannot
ask, R&D Seminar, Curtin University of Technology,
Sarawak Campus, Malaysia, 5 March 2004.
Invited speaker, Designing for Usability: Lessons
learned from R&D, School of Communication
and Information, Nanyang Technological University,
Singapore, 11 February 2004.
Keynote speaker. Designing for Usability: Lessons
Learned from Various Applications, 2003 International
Conference on Technology and Management, National
Taipei University of Technology, Taipei, Taiwan,
23 October 2003.
Invited speaker. Designing for Usability. Lessons
Learned and Lessons Remaining, R&D Seminar,
Curtin University of Technology, Sarawak Campus,
Miri, 26 September 2003.
Invited speaker. Ergonomics Research among the
Elderly, Seminar on Mental Health and Quality
of Life Research amongst Older Malaysians, Renaissance
Palm Garden Hotel, Putrajaya, 22 March 2003.
Keynote address. Trends and Issues in Design
by Customer for Mass Customization, Conference
on Product Design, Ming-Chi Institute of Technology,
Taipei, Taiwan, 13 November 2002.
Keynote address. World wide work in the Digital
Economy, Seminar at the Department of Industrial
Design, Chang-Gung University, Taipei, Taiwan,
14 November 2002.
Keynote address. Affective Human Factors Design
for Competitive Advantage, 3rd Malaysian Ergonomics
Conference 2002, Eden Garden Hotel, Johor Bahru,
June 2002.
Keynote address. Enabling World Wide Work in
the Digital Economy, 6th International Conference
on Work With Display Units (WWDU) 2002, Berchtesgaden,
Germany, May 2002.
Invited speaker. Ergonomic Design of Assistive
Device for Rehabilitation. 2nd Malaysian Ergonomics
Seminar 2001, Penang, April 2001.
Keynote address. Human Factors of Virtual Collaboration
in Product Design. 4th APCHI/6th SEAES-ASEAN Ergonomics
2000 Conference, Singapore, November, 2000.
Invited panelist. The Future of Work. World Engineers’
Convention, Hannover, Germany, June 2000.
Keynote address. Benefit-Cost of Ergonomics Improvements.
Malaysian Ergonomics Seminar 2000, University
of Malaya, Kuala Lumpur, Malaysia, April 2000.
Plenary address. Multimedia Usability and Its
Implications for Ergonomics. IEA Global Ergonomics
Conference, Cape Town, South Africa, 9-11 September
1998.
Keynote address. Human Factors of IT -based Solutions
for Worldwide Manufacturing Web, HAAMAHA ‘98
International Conference, Hong Kong, July 1998.
Keynote address. Human Factors in Multimedia
Production. IEA ‘97 Triennial Congress,
Tampere, Finland, July 1997.
Invited speaker. Multimedia and Related Forms
of Electronic Communication - Strengths and Opportunities,
National Institute of Occupational Health and
Safety, Helsinki, Finland, May 1998.
Invited speaker. A Framework for Telelearning
at UNIMAS. International Conference on Distance
Education, Universiti Sains Malaysia, Penang,
February, 1997.
Invited speaker. Multimedia Technologies and
Future Work Systems. Paper read at the International
Symposium of Future Developments in Human Work
Systems, 27-28 June 1996, Yokohama, Japan.
Invited speaker. ASEAN industrialisation and
ergonomics relevance in the 21st century. Ergonomics
Seminar for industry in conjunction with the 43rd
Anniversary of the Faculty of Psychology and 46th
Anniversary of Universitas Indonesia, University
of Indonesia, Jakarta, March, 1996.
Invited speaker. Globalization and technology-based
higher education; UNIMAS experience.
ASAIHL National Conference, UTM, Skudai, Johor,
May, 1995 (Together with Zawawi Ismail)
Keynote address. The relationship between psychology
and road accidents. MKJR Kedah Seminar on ‘Towards
a Safe Lorry Transportation System,’ Sungei
Petani, Kedah, August 1995.
Invited speaker. Ergonomics issues in safety
of work environments: some possible interventions
Seminar on ‘Injury Control and Promotion
of Safety: Education and Research’, Institute
of Advanced Studies, Universiti Malaya, Kuala
Lumpur, March, 1994.
Invited speaker. Social marketing of ergonomics
- a framework. The Third Afro Asian Psychological
Congress, Universiti Kebangsaan Malaysia Bangi,
August, 1994.
Invited speaker. The psychology programme based
on the UNIMAS model. Colloquium on ‘Setting
up of a Centre for Psychological Studies’,
Universiti Kebangsaan Malaysia, July, 1993.
Invited speaker. Urban pedestrian safety: its
implications on road planning. 33rd Annual General
Meeting of MKJR, Penang, May, 1992 (Together with
Ismail Maakip).
Invited speaker. Teknologi pendidikan: ke arah
masyarakat cemerlang (Educational technology:
towards excellence). Ministry of Education, Kuala
Lumpur, June, 1992.
Invited speaker. Effects of shiftwork on nurses’
performance. Seminar organized Malaysian Occupational
Health National Association (MOHNA), Petaling
Jaya, June, 1992.
Invited speaker. Economic development in the
direction of Vision 2020: its implications on
road safety policy and research. National Colloquium
on ‘Economic Development towards Vision
2020’, Kuala Lumpur, December, 1992.
Invited speaker. Penilaian kempen keselamatan
jalan raya (Evaluation of road safety campaign).
32nd Annual General Meeting of MKJR, Holiday Inn
Hotel, Kuching, Sarawak, 20-22 May, 1991.
Invited speaker. Effects of shiftwork and VDT
on women's health and performance. ASEAN Regional
Workshop, Amara Hotel, Singapore, 22-25 April,
1991.
|
EXPERT ADVISOR
| 111 |
National Action
Plan for Road Safety Programmes, organised by MKJR,
Pelangi Pulau Langkawi, October, 1991 (Co-Facilitator).
Strategic Planning, organised by UKM, Port Dickson,
February, 1992 (Co-Facilitator).
Multi-sectorial Campaign on Road Safety at the National
Level, organised by MKJR, Ministry of Transport,
February, 1992.
Academic Strategic Planning, organised by UNIMAS,
Langkawi, December, 1992.
Accident Counter measures, organised by MKJR, Ministry
of Transport, April, 1993.
Strategic Planning and Action Plan of Faculty/Centre/Institute,
organised by UNIMAS, August, 1995.
Corporate Plan of Faculty/Centre/Institute, organised
by UNIMAS, January, 1996.
Workshop on Road Safety, organised by MKJR, Ministry
of Transport,, Port Dickson, March, 1996
Road Bullies, organised by MKJR, Ministry of Transport,
Subang Jaya, July 1996.
eCitizen project, organised by MicroUsability Pty
Ltd, Singapore, 10 October 2003 (Facilitator). |
CONFERENCE ORGANISATION
| 111 |
• Secretary,
Organizing Committee. Third Asian Conference of
International Association for Cross-Cultural Psychology,
UKM, Department of Psychology, 1983.
•
Secretary, Organising Committee. The 9th Workshop
on Counselling, Department of Psychology, UKM, 1990-1991.
• Member, Organising Committee. The 4th Symposium
on Indonesian-Malaysian Culture (SKIM IV), 1991.
• Member, Technical Sub-committee. Member,
International Scientific Support Committee Conference
on Asian Road Safety 1993 (CARS), March-December
1993.Member, Social & Technical Committee, Infotech
95, National Conference on Information Technology,
November 1995, Kuala Lumpur
• Member,
Science & Technical Committee; Developing Capability
for the New Asia ‘96, International Seminar
and Workshop on Education for Capability, April
1996, Kuching
• Member, International
Programme Committee. APCHI ‘96, First Asia-Pacific
Conference on Computer-Human Interaction, June 1996,
Singapore
• Chairperson, Co-organizing
Committee. International Symposium of Future Developments
in Human Work Systems, June 1996, Yokohama
• Chairperson, Co-organizing Committee. 4th
Pan Pacific Conference on Occupational Ergonomics,
November 1996, Taipei
• Member, Steering
Committee. Online Educa Asia ‘96, September
1996, Singapore
• Member, International
Scientific Advisory Committee; IEA ‘97 Congress,
13th Triennial International Conference of the International
Ergonomics Association, 1997, Tampere, Finland
• General Chair, ASEAN Ergonomics ‘97,
Joint Southeast Asian Ergonomics Society-International
Ergonomics Association and UNIMAS Conference, November
1997, Kuala Lumpur
• General Chair, VR’98
Seminar and Workshop on Virtual Reality, April 1998,
Kuala Lumpur
• Member, International Scientific
Committee. 6th International Conference on Human
Aspects of Advanced Manufacturing: Agility and Hybrid
Automation, July 1998, Hong Kong.
• Member,
Program Committee. APCHI ‘98, July 1998, Kanagawa,
Japan.
• Member, International Organising
Committee. XV International Seminar of Ergonomics
Teachers, June 1998, Wroclaw, Poland.
•
Member, Program Committee on Human-Computer Interfaces.
The 8th International Conference on Human-Computer
Interaction, August 1999, Munich, Germany.
•
Member, International Program Advisory Board. CAES
‘99, Computer Aided Ergonomics and Safety
Conference, May 1999, Barcelona, Spain.
•
Member, International Scientific Committee. XVI
International Seminar of Ergonomics Teachers, June
1999, Bozkowo/Lezno, Poland.
• Member,
International Scientific Support Committee. 5th
World Conference on Injury Prevention and Control,
March 2000, New Delhi, India.
• Member,
International Scientific Program Board on ‘The
Future of Work’. World Engineers Convention
at EXPO 2000, June 2000, Hannover, Germany.
• Member, International Scientific Committee,
7th International Conference on Human Aspects of
Advanced Manufacturing, August 2000, Krakow, Poland.
• Member, International Scientific Committee,
4th APCHI /6th SEAES-ASEAN Ergonomics 2000, December
2000, Singapore.
• Chair, International
Training Workshop on ‘Using Anthropometry
for Effective Solutions’, March 2000, Kuching,
Sarawak, Malaysia. Sponsored by the US Asian Office
Aerospace Research and Development (AOARD), Tokyo,
Japan.
• Member, Technical Committee,
Malaysian Ergonomics Seminar 2001, April 2001, Penang,
Malaysia.
• Programme Chair, International
Conference on Affective Human Factors Design, June
2001, Singapore.
• Member, International
Advisory Committee, International Congress on ‘
Humanizing Work and Work Environment’, December,
2001, Bombay, India.
• Member, International
Advisory Board, International Conference on Work
with Display Units, May 2002, Berchtesgaden, Germany.
• Member, International Scientific Committee,
8th International Conference on Human Aspects of
Advanced Manufacturing: Agility & Hybrid Automation,
26-30 May 2003, Rome, Italy.
• Regional
Liaison Member, ACM SIGCHI 2003, 5-10 April, Ft.
Lauderdale, Florida, USA.
• General Chair,
7th SEAES/4th Malaysian Ergonomics Conference, 19-22
May 2003, Kuching, Sarawak, Malaysia.
•
Co-Chair, Macroergonomics for Organizational Productivity
Workshop,19 May 2003, Kuching, Sarawak.
•
President and Chair, 7th International Scientific
Conference on Work with Computing Systems, 29 June-2
July 2004, Kuala Lumpur, Malaysia.
• Member,
International Scientific Board, 8th SEAES Conference
20th Anniversary, 23-25 May 2005, Bali, Indonesia.
• Member, International Scientific Advisory
Board, 8th ODAM 20th Anniversary, 23-26 June, 2005,
Maui, Hawaii.
• Member, International
Scientific Board, 16th International Ergonomics
Association Congress, 10-14 July 2006, Maastricht,
The Netherlands. |
SHORT COURSES FOR INDUSTRY
| 111 |
• Introduction
to Human Factors/Ergonomics; Work and Workplace
Design and Human Reliability. Joint UNIMAS-NIOSH
Course, December, 1994, NIOSH, Kuala Lumpur.
• Introduction to Human Factors/Ergonomics;
Analytical Methods and Ergonomics Standards. Joint
UNIMAS-SIRIM Course, March, 1996, Santubong, Sarawak.
• Overview of Multimedia Technologies, Instructional
Design and Multimedia Authoring. Course on ‘Web
Publishing and Multimedia Authoring’ for INTAN
Officers, August 1996, UNIMAS, Kota Samarahan, Sarawak.
• Human Factors in Developing Multimedia
Capability, ODAM ‘96, Colorado, USA, July,
1996.
• Human Factors in Multimedia Design,
PPCOE ‘96, November 1996, Taipei, Taiwan.
• Ergonomics in the Office and Furniture Design.
Joint IDEA/UNIMAS-Malaysia Design Council Course,
March, 1997, Kuala Lumpur.
• Introduction
to Ergonomics/Human Factors. Joint IDEA/UNIMAS-SIRIM
Berhad Course, SIRIM Berhad, November 1997, Shah
Alam, Selangor.
• Human Factors in Multimedia
Production, Finnish Institute of Occupational Health,
August 1998, Helsinki, Finland.
• Human
Factors in Designing Usable Web Sites for E-commerce,
August 1999, UNIMAS, Technology Park, Bukit Jalil,
Kuala Lumpur.
• Using Anthropometry for
Effective Solutions’, International Workshop,
March 2000, Kuching, Sarawak.
• Human
Factors of Collaborative Systems, Introducing the
VCODE System. Transfer of Technology Workshop on
Usability of Collaborative Systems, May 2001, Unimas,
Technology Park Malaysia, Bukit Jalil.
•
Kansei Engineering for Product Development, Joint
IDEA/UNIMAS-Proton Berhad Course, February 2002,
Kuala Lumpur. |
CONSULTING
| 111 |
• National
Institute of Occupational Safety and Health (NIOSH),
Bangi, Malaysia (1991).
• Shell Malaysia
Berhad, Kuala Lumpur, Malaysia (1992).
•
Sapura Advanced Systems, Kuala Lumpur, Malaysia
(1992).
• Finnish Institute of Occupational
Health, Helsinki, Finland (May-June 1998)
•
IdTown.com, Hong Kong (Oct-Dec 1998)
•
Honeywell Singapore Technology Ltd, Singapore (2000-2001)
• Proton Berhad, Shah Alam, Malaysia (2001-2002).
• MicroUsability Pte Ltd, Singapore (2003
- ).
• InfoComm Development Authority
(IDA), Singapore (Nov 2003).
• Ministry
of Trade and Industry, Singapore (Dec 2003-Feb 2004)
• Scholle Industries Pty Ltd, Australia (March
2004)
• Sarawak Shell Berhad, Malaysia
(June-October 2004). |
|
